MaxPac Single/Dual/Triple-Screen 8230 Training and Maintenance Guide
91
8) The soft power cable must be removed from the motherboard connection posts (the location of
this connector is pointed out in Figure 5-102). Observe that this cable connector is attached to the
motherboard with a flexible adhesive (such as Marine Goop). Simply pull the connector (not the
wire) until the adhesive gives.
Figure 5-103
Figure 5-104
9) The center and left monitor power and video cables must be removed from the inner chassis
cover cable channel as show in Figure 5-103.
10) The power and video cables for the right monitor (and also and the soft power cable) must be
removed from the inner chassis cover cable channel as shown in Figure 5-104.
Figure 5-105
Figure 5-106
11) You will need a second person to hold the monitor assembly while you lift the inner chassis out of
the outer chassis Figure 5-105.
Note
: As the weight of the inner chassis is removed, the display assembly and outer chassis will
topple over if not being held securely
12) Next, the display assembly should be rotated down as illustrated in Figure 5-106.
Содержание Dual-Screen 8230
Страница 6: ......
Страница 26: ...20 MaxPac Single Dual Triple Screen 8230 Training and Maintenance Guide Figure 3 39 Figure 3 40 ...
Страница 27: ...MaxPac Single Dual Triple Screen 8230 Training and Maintenance Guide 21 Figure 3 41 Figure 3 42 ...
Страница 36: ...30 MaxPac Single Dual Triple Screen 8230 Training and Maintenance Guide Figure 3 69 Figure 3 70 Figure 3 71 ...
