Maxon BMR-35, Руководство по обслуживанию

Страница: 26 / 49

11921
Slauson
A
ve.
Santa
Fe
Springs,
CA.
90670
(800)
227-41
16
FA
X
(888)
771-7713
PAGE 26
SWITCH AND HARNESS REPLACEMENT
1.
Lower the Platform to the ground.
Remove the Tear Drop Assembly and the
Cover from the curb side Column.
2.
Remove the Switch Plate from the
Runner Assembly, and remove the wires
from the Switch. Attach a rope or cable
(at least 20 ft. in length) to the end of the
wires from the Switch. This will become
the “
Fishing Rope ”, and will be used to
pull the new cable through the same route
as the original wiring.
3.
Located inside the
Switch Mounting hole is a
cable clamp. Loosen, but
do not remove the nut
that fastens the clamp to
the Runner Assembly.
COVER PLATE
TEAR DROP &
CHAIN ASSEMBLY
FISHING ROPE
SWITCH
PLATE
CABLE CLAMP