maxon motor MCD EPOS 60 W, Справочник по аппаратуре

Страница: 19 / 21

Hardware Reference MCD EPOS 60 W
December 2011 Edition / document number 791272-04 / subject to change maxon motor control
Logic supply
voltage
[+V
C
12-50 VDC] Connector [J2] Pin number [8]
Ground of supply
voltage
[Power_Gnd] Connector [J2] Pin number [5]
Optionally, the logic supply voltage can be sourced separately.
This
allows a safe and economical power backup feature.
In case of no separate Logic supply is applied, the Logic supply will be
sourced by the Power supply voltage automatically.
Any available power supply can be used, provided it meets the minimal
requirements set out below.
Output voltage V
C
min. 12 VDC; V
C
max. 50 VDC
Ripple < 10 %
Min. Output power P
C
min. 3 W