maxon motor MCD EPOS 60 W, Справочник по аппаратуре

Страница: 11 / 21

Hardware Reference MCD EPOS 60 W
December 2011 Edition / document number 791272-04 / subject to change maxon motor control
“High Speed Command” differential input by default and can be configured
via software setting.
Connector No. and Pin No.
Connector [J1] Pin number [3]
Connector [J1] Pin number [4]
Min. differential Input voltage ±200 mV
Line receiver EIA standards RS-422
Max. input frequency 500 kHz
Figure 8
: Digital input 8 “Differential” circuit
Single-ended DigIN 8 Connector No. and Pin No. Connector [J1] Pin number [3]
Input voltage
0…5 VDC
Max. input voltage ± 24 VDC
Logic 0 < 2.0 V
Logic 1 > 3.0 V
Input resistance
typical 48 k
Ω
(referenced to D_Gnd)
Figure 9
: Digital input 8 “Single-ended” circuit
Using the Digital Input as single ended, apply the input signal between
DigIN 8 [J1/3] and D_Gnd [J1/5] and let DigIN 8/ [J1/4] unconnected.