Monarch EDGE Control Hub configuration
| 44 |
Part # V11470-301-0101
Last updated: July 27, 2020
Routing scheme
Select one of the following:
•
Unicast
When selecting unicast, you need to specify the
destination IP address of the stream. You can enter a valid
IP address or host name.
•
Multicast
Enter
a
Multicast address
. Using multicast
may require additional network configuration to support
the transmission protocol (some network switches and
routers can block multicast signals). For more information,
contact your network administrator.
RTSP
Name
Enter a name for your stream.
Network interface
Select LAN1 or LAN2
RTSP URL
Enter the URL of your RTSP stream.
Genlock Source
Internal/external
Select your genlock source,
Internal
or
External
. If you genlock to
the Monarch EDGE’s internal clock, you will also need to select your
frame rate.
Audio Output (Headphone)
1
Audio source
Select which audio source to output through the Monarch EDGE
headphone jack.
Volume
Increase, decrease, or mute the headphone volume.
1. Available only when the Talkback feature is enabled.
Setting
Description