Monarch EDGE Control Hub configuration
| 41 |
Part # V11470-301-0101
Last updated: July 27, 2020
Time to live
The number of hops or network nodes (such as network switches
or routers) through which a multicast signal can travel. Once the
TTL number is reached, the receiving network node prevents the
signal broadcast further down the network. The value ranges from
1 to 255. The default is 16.
Routing scheme
Select one of the following:
•
Unicast
When selecting unicast, you need to specify the
destination IP address of the stream. You can enter a valid
IP address or host name.
•
Multicast
Enter
a
Multicast address
. Using multicast
may require additional network configuration to support
the transmission protocol (some network switches and
routers can block multicast signals). For more informa-
tion, contact your network administrator. To also allow
unicast connections, enable the
Allow unicast connec-
tions
option.
RTMP
Enable stream
Enable or disable your stream.
Push location
The path of your RTMP stream.
Name
Enter a name for your stream.
Network interface
Select LAN1 or LAN2
Stream name/key
Enter a suffix as part of your stream address. If you’re using a
media player to decode your stream, the media player may require
this as part of the stream address to connect to a stream.
Use authentication
Enable this if you’re using an authentication server, then enter your
credentials (
User name
and
Password
).
MPEG-2 TS
Enable stream
Enable or disable your stream.
Base port
The port you are transmitting to on the receiving device.
Name
Enter a name for your stream.
Network interface
Select LAN1 or LAN2
Time to live
The number of hops or network nodes (such as network switches
or routers) through which a multicast signal can travel. Once the
TTL number is reached, the receiving network node prevents the
signal broadcast further down the network. The value ranges from
1 to 255. The default is 16.
Setting
Description