45
Matrix SETU VFXTH System Manual
•
In the
Destination Number
field, enter the number (24 characters, maximum) that you expect callers
to dial. Valid digits: 0–9, *, #, (dot). Default: Blank.
•
In the
Minimum Digits
field, enter the minimum number of digits of the destination number that the
caller must dial for the system to route the call. Valid range: 01–24. Default: 3.
If the dialed number string is less than the configured minimum length, the call will be rejected.
•
In the
Maximum Digits
field, enter the maximum number of digits to be dialed by the caller for the
system to consider it as end-of-dialing for routing the call. Valid range: 01–24. Default:16.
If the number string dialed by the caller exceeds the maximum length configured, the system will strip
off the extra digits, and route the call.
•
Select the
CLI Number to be sent on Destination Port
.
You may select from the following options:
•
Received Calling Party
•
Received Called Party
Default: Received Calling Party
CLI Number to be sent on Destination Port
is applicable only when
FXS Port
or
FXS Group
is selected
as the Destination Port (Routing Group).
•
Create the
Routing Group
.
•
To create a group of
sequential
FXS Ports
as members,
•
Select the desired
FXS Port
numbers as members. Default: 1.
•
In the
in - order
box, select the order in which the system should hunt for a free member FXS
Port to route the call.
Select
Ascending
to start hunting from the first to the last member FXS Port.
Select
Descending
to start hunting from the last to the first member FXS Port. Default:
Ascending.
•
To create a group of
not-sequential
FXS Ports
as members,
•
Select an
FXS Group
.
•
Select
FXS Group
number. Default:1.
•
Click
Settings
. The
FXS Groups
window opens. Create the FXS Group. For detailed
instructions, see
•
Similarly, you can create group of
sequential
and
not-sequential
FXO Ports and SIP Trunks as
members.
•
You may create the
Fallback Routing Group
. To do this,
•
Select the
Apply
check box.
