Matrix SETU VFXTH System Manual
154
CLI Number to be sent on Destination Port
is applicable only when
FXS Port
or
FXS Group
is selected
as the Destination Port (Routing Group).
•
Create the
Routing Group
.
•
To create a group of
sequential
FXS Ports
as members,
•
Select the desired
FXS Port
numbers as members. Default: 1.
•
In the
in - order
box, select the order in which the system should hunt for a free member FXS
Port to route the call.
To start hunting from the first to the last member FXS Port, select
Ascending
.
To start hunting from the last to the first member FXS Port, select
Descending
.
Default: Ascending.
•
To create a group of
not-sequential
FXS Ports
as members,
•
Select an
FXS Group
.
•
Select
FXS Group
number. Default:1.
•
Click
Settings
. The
FXS Groups
window opens. Create the FXS Group. For detailed
instructions, see
•
Similarly, you can create group of
sequential
and
not-sequential
FXO Ports, SIP Trunk and Mobile
Ports as members.
•
You may create the
Fallback Routing Group
. To do this,
•
Select the
Apply
check box.
•
Follow the same instructions provided earlier to create
sequential
and
not-sequential
groups of FXS
Ports, FXO Ports, SIP Trunks and Mobile Ports.
•
Click
Submit
to save changes. The
Add Entry
window closes.
•
The entry you added appears in the
FXS Port - Destination Port Determination - Destination
Number Based
window.
To edit the Routing Group and/or the Fallback Routing Group, do the following:
•
Under Edit, click
Settings
.
