Matrix SETU VFXTH System Manual
158
•
Click the
Destination Port Determination
link
.
•
To configure the table for the SIP Trunk, click the
SIP-Calling Number Based
link.
•
To configure the table for the FXO Port, click the
FXO- Calling Number Based
link.
The
Calling Number Based
Table page opens.
•
Click
Add
to add an entry. A new window opens. Configure the following parameters:
•
In the
Calling Number
field,
enter numbers (max. 24 characters) from which you expect calls to be
received. All ASCII characters are allowed. Default: blank.
•
Select the
CLI Number to be send on Destination Port
.
You may select from the following options:
•
Received Calling Party
•
Received Called Party
Default: Received Calling Party
CLI Number to be sent on Destination Port is applicable when FXS Port/Group is determined as the
Destination Port.
•
Create the
Routing Group
.
•
To create a group of
sequential
FXS Ports
as members,
•
Select the desired
FXS Port
numbers as members. Default: 1.
•
In the
in - order
field, select the order in which the system should check for a free member FXS
Port to route the call.
Select
Ascending
to start checking from the first to the last member FXS Port. Select
Descending
to start checking from the last to the first member FXS Port. Default: Ascending.
•
To create a group of
not-sequential
FXS Ports
as members,
•
Select a
FXS Group
.
•
Select
FXS Group
number. Default:1.
•
Click
Settings
. The
FXS Groups
window opens. Create the FXS Group. See
detailed instructions.
