Matrix SETU VFXTH System Manual
252
•
Click the
Start Test
button. The system will call the phone number, you have configured. The message
‘
Starting..
..’ appears on your screen.
While the test is being conducted, you will hear pulsating tone on all the ports of the system.
•
Answer the test call from the telephone, you have configured.
If you are using a Mobile phone, Mute the microphone of your mobile phone.
If you are making the test call on a landline number, mute the call using the Mute key of the phone. If your
phone does not have a Mute key, unplug the handset cable from the phone body. This is to prevent test
signals from reflecting back into the mic of the handset.
•
After approximately 5 seconds, you will hear the test signals being transmitted by the system for the
duration of the test. The message ‘
Test is running for FXO 1...
’ appears on your screen.
If you wish to abort the test midway, you may click the
Abort Test
button.
•
On completion of the test, the system will automatically disconnect the call. The message ‘
Test Status:
Successfully completed
’ appears on the screen.
