manualshive.com logo in svg

Matrix SETU VFXTH, Системное руководство

Поделиться
Скачать
Matrix SETU VFXTH Скачать руководство пользователя страница 265

Matrix SETU VFXTH System Manual

260

•

In the 

ACS Password

 field, enter the password used by SETU VFXTH for HTTP authentication. 

Default: Blank.

•

In the 

UDP Connection Request Port

 field, enter the port on which the ACS will make a connection 

request to SETU VFXTH using UDP connection. The valid Port range is from 1031-65535. Default: 
54320.

•

In  the

 TCP Connection Request Port

 field, enter the port on which the ACS will make a connection 

request to SETU VFXTH using TCP connection. The valid Port range is from 1031-65535. Default: 
7547.

•

In the 

Connection Request Username 

field, enter the username used by SETU VFXTH to 

authenticate the incoming connection request made by ACS. Default: Blank.

•

In the 

Connection Request Password

 field, enter the password used by SETU VFXTH to 

authenticate the incoming connection request made by ACS. Default: Blank.

•

Select the 

Periodic Inform

 check box, if you want SETU VFXTH to check updates available on ACS 

periodically. Default: Disabled.

•

In the 

Periodic Inform Interval

 field, enter the time in seconds after which SETU VFXTH must attempt 

to connect with the ACS to check for updates. Default: 1800.

•

Select the 

STUN Enable

 check box, if your SETU VFXTH is located behind the NAT Router and SIP 

messages need to be forwarded to the public network. Default: Disabled.

STUN specifies the mechanism required for NAT traversal in SIP messages.

STUN server facilitates traversing through most NATs, except symmetric NATs. If your router has 
symmetric NAT, do not enable STUN.

•

In  the 

STUN Server Address: Port

 field, enter the STUN Server Address and the Listening Port of the 

STUN Server.

The STUN Server Address can be a maximum of 256 characters. All ASCII characters are allowed. 
The valid range of the STUN Server Port is from 1025–65535. Default: 3478.

•

In the 

STUN Server Username

 field, enter the username provided by the STUN server to authenticate 

the STUN Request. Default: Blank.

•

In the 

STUN Server Password

 field, enter the password provided by the STUN Server to authenticate 

the STUN Request. Default: Blank.

•

Click 

Submit

 to save changes.

•

You may log out of Jeeves.

Содержание SETU VFXTH



































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды