Matrix SETU VFXTH System Manual
156
•
Click the
Destination Port Determination
link
.
•
To configure the table for the SIP Trunk, click the
SIP-Destination Number Based
link.
•
To configure the table for the FXO Port, click the
FXO-Destination Number Based
link.
•
To configure the table for the FXS Port, click the
FXS-Destination Number Based
link.
The
Destination Number Based
Table page opens.
•
Click
Add
to add an entry. A new window opens.
•
In the
Destination Number
field, enter the number (max. 24 characters) you expect callers to dial.
Valid characters: 0 to 9, +, * and #. Default: Blank.
•
In the
Minimum Digits
field, enter the minimum number of digits of the destination number that the
caller must dial for the system to route the call. Range: 01 to 24. Default: 03.
If the dialed number string is less than the configured minimum length, the call will be rejected.
•
In the
Maximum Digits
field, enter the maximum number of digits of the destination number the caller
must dial for the system to route the call. Maximum length range: 01 to 24. Default:16.
If the number string dialed by the caller exceeds the maximum length configured, the system will strip
off the extra digits, and routes the call.
•
Select the
CLI Number to be send on Destination Port
.
You may select from the following options:
•
Received Calling Party
•
Received Called Party
Default: Received Calling Party
CLI Number to be sent on Destination Port is applicable when FXS Port/Group is determined as the
Destination Port.
•
To create a group of
sequential
FXS Ports
as members,
•
Select the desired
FXS Port
numbers as members. Default: 1.
•
In the
in - order
field, select the order in which the system should check for a free member FXS
Port to route the call.
Select
Ascending
to start checking from the first to the last member FXS Port. Select
Descending
to start checking from the last to the first member FXS Port. Default: Ascending.
