221
Matrix SETU
VFXTH
System Manual
Making a New Call using Access Code
This feature enables callers to disconnect the current call and make a new call using SETU VFXTH without getting
disconnected from the system.
This feature is useful when you want to allow users to make multiple calls without getting disconnected each time
their call ends.
Let us understand this feature with an example:
•
A Cyber-Cafe has installed SETU VFXTH for providing international calling service to the home users.
•
The Cyber-Cafe provides home users who have subscribed for this service, a number to call the SETU
VFXTH, a PIN Number and a Password.
•
To make international calls, home users must call SETU VFXTH, dial the PIN Number and Password and
the international number. Thus each time they want to make a call, they must repeat this process of dialing
over and over again.
•
Making a New Call feature eliminates repeated dialing of these numbers.
•
After calling SETU VFXTH, home users can dial their PIN number and Password once and call the
international number. At the end of the call, they can dial the Access Code for Making a New Call. They will
remain connected to the system and can make another call.
•
If the remote end disconnects the call during speech, SETU VFXTH will play error tone for 4 seconds
followed by dial tone. The users can make a new call without dialing the feature Access Code.
•
This feature is applicable only on the Source Port and only when
After Answering the Call and
Collecting the Digits
is selected as the option to Route all Incoming Calls (with CLI). Making New
Call Access Code dialed by users will be ignored, if any other option is selected to Route all Incoming
Calls (with CLI). However, if you have enabled
Connect Source Port when number is outdialed
on
the FXO Port, you will not be able to provide this feature to the users.
Configuring Making a New Call
To provide this feature to users, you must enable
Allow making New Call using Access code
on the FXO Ports.
For instructions, under
.
How to make a New Call using Access Code
•
When you are in speech during the current call.
•
Dial
#91
. Current call will disconnect.
•
Dial the new number you want to call.
•
While in speech, dial
#91
again to make another call.
