Matrix SETU VFXTH System Manual
9
CHAPTER 3
Installing SETU VFXTH
Before You Start
Before you begin to install and set up the hardware of SETU VFXTH, make sure you have the items listed below
ready:
•
A suitable location to install SETU VFXTH.
•
Necessary telecom wiring for the lines and devices to be connected to the FXS and FXO Ports.
•
Standard, good quality, twisted pair telephone cables with 0.5mm conductor diameter and RJ11 plugs for
the FXS Ports and FXO Ports.
•
At least one standard telephone instrument to connect to the FXS Port.
•
An Analog Trunk Line from the CO/PSTN to connect to the FXO Port.
•
A SIP Account with an ITSP to test VoIP connectivity.
•
A standalone computer or a computer connected in a LAN to access Jeeves, the web-based configuration
tool of SETU VFXTH.
Protect SETU VFXTH and Yourself
For safe and efficient operation, observe the guidelines and all necessary safety precautions given in here. While
installing as well as using any electronic appliance, take every safety precaution to reduce the risk of fire, electric
shock and injury to persons. Read and understand all the instructions given in the manual.
•
Do not install the system at any of the below locations:
•
in any area where it is directly exposed to sunlight, excessive cold or humid atmosphere.
•
any area where sulfuric gases are produced and where there are thermal springs.
•
at any place which is sensitive to vibrations or frequent and strong shocks.
•
at dusty places or places where it comes in direct contact with oil or water.
•
near any water source like a wash bowl, kitchen sink, bath tub or near a swimming pool.
•
on movable or unstable surfaces, which may cause the product to fall and get damaged.
•
Protect the system from heavy voltages entering into it from the Trunks.
•
Always wear an electrostatic discharge preventive wrist strap or belt and use a grounding mat when
handling the system.
