manualshive.com logo in svg

Matrix SETU VFX44L, Системное руководство

Поделиться
Скачать
Matrix SETU VFX44L Скачать руководство пользователя страница 67

Matrix

67

SETU VFX88L

/

VFX44L V1

System Manual

It gives ‘error tone if it is disabled and checks for any Hotline
feature. If it is ‘set’, it will dial out the ‘Hotline number’ programmed.
But if feature is not set, you will get ‘Dial tone’.

• The dialed number is checked for ‘Access code’. If it matches with

the code, the feature is set as per the ‘code’ for example; Call
forward, Call Waiting, DND etc. If any feature is set the gateway
will process the call as per the feature otherwise the dialed number
is checked for Allowed-Denied logic. The call will be routed as per
call routing option programmed for the FXS port: Fixed or Dialed
Number Based.

• The call is routed as per Routing Group assigned and the

destination port is selected as per member selection logic either
First free or Rotation.

• Now after selecting the destination port (SIP Account Number) from

the Routing Group, if the dialed number is IP Number which should
use SIP Proxy to route the call, then number will be dialed as per
ANT logic and call will be established. But if IP Number is for non-
proxy type, then Peer-to-Peer table is followed and then ANT logic
is applied to dial out the number.

• Note that if he dialed number is Emergency Number or Access Code

is 

##

, then the number will be dialed out from the Life Line port.

SIP to FXS Call:

• If you receive any IC call, the gateway will first check if the IC call is

allowed or not and then follow the logic for Anonymous call and
match with Black Listed Number to decide on blocking the IC call.

• If the number is allowed, the call will be routed as per the Routing

Option set: All Calls or Called Number Based Routing.

• The call is routed as per Routing Group assigned and the

destination port is selected as per Member selection logic, either
First Free or Rotation.

• Now after selecting the destination port (FXS Port), from the

Routing Group, the call is landed on the destination FXS port. The
Phone connected on that FXS Port will ring with cadence for the
Country-type programmed This will give indication for an IC call.
Speech is established if FXS port goes OFF-Hook.

• Now if another IC call is there for the gateway and the feature Call

Waiting is set then you will get Call Waiting Beeps. IC Call is not
supported from the Life Line port.

Содержание SETU VFX44L




































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды