Matrix SETU VFX44L, Системное руководство

Страница: 49 / 195

Matrix
49 SETU VFX88L
/
VFX44L V1
System Manual
of error tone timer and remote user1 will be released.
• If you are ON-Hook during any error condition, you will get ‘Ring’
indication for period of ‘ring timer’. If you don’t pick up the call,
during this time the remote user1 will get released.
• If the valid number is dialed, and if there is no error condition,
further call processing will be as per flowchart of SIP to FXS Call in
chapter ‘Call Processing’.
How the Notification Timer works?
• Transfer Notification timer is programmable (Only from ‘Web’).
• When call transfer is initiated the notification timer starts.
• After notification is received, this timer is stopped.
• If the transferee disconnects the user, the notification timer is
stopped and now the you can make a new call.
How to program?
• Refer VFX88L
/
VFX44L Web Jeeves.
• Click on
‘Class of Service’
to Enable the feature.
• Click on ‘
Access Code’
to know the Access code.
Click on “System Parameters” to program ‘Transfer Notification
timer’.
Range = 001-999.
Default = 030 sec.
Important Points:
• It is not required to check Access Code table because the user is
going to dial the number which is to be transferred to the remote
end.
• System will also not check the Allowed-Denied logic because the
number dialed by the user for Blind Transfer is not to be dialed by
the system. Whereas Allowed-Denied logic is to be applied when it
is to be dialed by the system.
• After dialing
Flash
(i.e dialing the matured state access code), if
other request is received from the remote end, that request will be
rejected.
• After dialing
Flash
(i.e dialing the matured state access code), if
there is another call for the same user, that call is not considered as
Call waiting and the call will be routed to the next port as per the
routing group for routing the call.