Matrix SETU VFX44L, Системное руководство

Страница: 108 / 195

Matrix
108 SETU VFX88L
/
VFX44L V1
System Manual
IP Dialing
What’s this?
• This chapter describes some important conventions for dialing IP
number in different condition and general information regarding
parameters sent and received during IP call.
• IP number can be dialed with dot ’.’ as entered by ‘*’ while dialing it.
(If IP dialing is to be used, don’t program ‘*’ as the End of Dialing
digit).
• For e.g. to dial IP address 192.167.100.1 dial as: 192*167*100*1
from the Phone at FXS.
• The system considers ‘*’ as
‘.’
, only when * is not dialed as first
digit i.e. if user dials first digit as *, it will be considered as ‘*’ dialed.
• While programming the IP number in the Number list for Allowed-
Denied Number logic, enter directly
‘.’
. For this, IP Number is
considered as Normal Number, dialed.
• If IP address dialed is allowed, the system will use the first Non-
proxy account whose SIP ID value is as default value (‘*’) and
‘Status’ parameter is enabled. No Routing option and Routing group
selection logic will be applied.
• If SIP ID is programmed for all the Non-proxy SIP trunks, the
system will use the first non-proxy SIP account whose ‘Status’ is
enabled.
• The ANT logic is not applied after selecting the Non-proxy account.
Outgoing call from any SIP Account:
• When an OG call is made through any SIP Account (destination),
the gateway will send following values to the destination (SIP
Account) for further call processing:
• SIP Account Number.
• Complete Called Party Number with Called Party Name if present.
e.g.: Sumer, 2001@192.168.1.10 (if Name and Destination IP
address is found from the Peer-to-Peer Table for the dialed
number) or 2001 only i.e. dialed number by user (if Name and
Destination IP address is not found from the Peer-to-Peer Table
for the dialed number) or 192.168.001.010 if only IP address is
dialed by user.
• Calling Station Number and Name(Number and name of the FXS