manualshive.com logo in svg

Matrix SETU VFX44L, Системное руководство

Поделиться
Скачать
Matrix SETU VFX44L Скачать руководство пользователя страница 156

Matrix

156

SETU VFX88L

/

VFX44L V1

System Manual

• For I/C call on SIP account: If Number of calls (incoming or

outgoing) is less than programmed value, the call will be routed to
the FXS port as per the routing option programmed for this SIP
account. But if it is equal to the programmed value, the call will be
rejected. Refer chapter ‘Call Processing’.

• For OG call on SIP account:

• When any free member is found from SIP account routing group,

the system will check whether number of calls made through this
free member found (SIP account) is equal to Maximum
Simultaneous Outgoing call programmed for this free member
found (SIP Account).

• If Number of calls (incoming or outgoing) is less than programmed

value, the call will be routed through this free member (SIP
account).

• But if Number of calls (incoming or outgoing) is equal to

programmed value, the system will find another free member from
the SIP account routing group.

• This parameter is not applicable for transfer call or call forward call.

Range = 8 (4 for VFX44L)

Default = 8 (4 for VFX44L)

Note 1:

• When Network port link is failed, all SIP Accounts are considered

as disable.

Note 2:
•

How to consider Peer-to-Peer Call (

Non-Proxy

):

• If Registrar Server Address is programmed for any SIP Account,

that SIP Account is considered as Proxy.

• If Registrar Server Address is Blank, that SIP account is

considered as the Non-Proxy.

Note 3:

• SIP ID parameter programming:

•

By default this parameter field is programmed as ‘*’ for all
SIP Accounts.

• SE should not program the same SIP ID for different SIP account

otherwise the first exact match will be considered for every call

Содержание SETU VFX44L




































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды