manualshive.com logo in svg

Matrix SETU VFX44L, Системное руководство

Поделиться
Скачать
Matrix SETU VFX44L Скачать руководство пользователя страница 153

Matrix

153

SETU VFX88L

/

VFX44L V1

System Manual

• The Vocoders for the OG calls will be selected as per the

preferences programmed.

Note:

• In case of IC call, this parameter will not be checked. Rather, the

Vocoder requested by the remote end will be entertained if
supported by the Gateway, else the call will be rejected.

DTMF Option:

• Select the DTMF Option from:

• RTP (RFC 2833)
• SIP INFO
• In-Band

• This option is used for both incoming and outgoing calls.
• In case of OG call,

• The Gateway will request the DTMF option selected to the remote

end.

• If in response from remote end, same DTMF option requested is

sent, DTMF option selected will be used for DTMF dialing.

• If in response from remote end, same DTMF option requested is

not sent, In-Band DTMF option will be used by default.

• For Example: If DTMF option ‘SIP INFO’ is selected and when OG

call is made, SIP INFO is requested to the remote end the SIP
message for DTMF dialing. Now if remote end responds with ‘SIP
INFO’, it will be used for sending and receiving DTMF digits. If
remote end responds with ‘RFC2833’ DTMF option, the Gateway
will use ‘In-Band’ for sending and receiving DTMF digits.

• In case of IC call,

• The Gateway will check the DTMF option requested by the

remote end, with the DTMF option selected.

• If DTMF option requested by the remote end is same as selected

DTMF option, it will detect the DTMF digits in DTMF option
selected.

• If DTMF option requested by the remote end is not same as

selected DTMF option, it will detect the DTMF digits in ‘In-Band’
only.

• For Example: If DTMF option SIP INFO is selected and when IC

call is received, if ‘SIP INFO’ DTMF option is requested by the
remote end, then the Gateway will reply with ‘SIP INFO’ and

Содержание SETU VFX44L




































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды