Matrix SETU VFX44L, Системное руководство

Страница: 136 / 195

Matrix
136 SETU VFX88L
/
VFX44L V1
System Manual
number received in SIP message is sent on FXS port and
displayed.
• FXS port Routing group is assigned for each index.
The table will look as below:
Index
Called Number
String FXS Port
RG
CLI Number on
FXS Port
01
No Match Found
Note1
01
Received Calling
Party
: : : :
99
:
01
Received Calling
Party
Note1:
• This entry is useful for routing the call when the called Party
number doesn’t match with any entry in the table. Thus Called
Number String for the 1
st
entry is not programmable.
How to program?
• Refer VFX88L
/
VFX44L Web Jeeves.
• Click on ‘
Called Number Based Routing
’.
•
Called Number String:
Enter maximum 24 characters. With Blank,
ASCII. Refer Note1.
•
FXS Routing Group:
First program the Routing Group (01-16) with
required port numbers then enter RG number here.
Default=01.
•
CLI Number on FXS Port:
Depending on which number is required
to be displayed on the extension’s display, enter the option:
• Received Calling Party Number
• Received Called Party Number
For 1st entry of no match for ‘Called Number String is found’, this
option is only ‘Received Calling Party’.
Important Points:
How to program ‘CLI Number on FXS Port?’:
• This parameter is programmed to get suitable CLI display on the
phone.
• Two gateways are connected through VPN or public IP address
and thus Peer-to-Peer call is made between this two PBX.