Matrix SETU VFX44L Скачать руководство пользователя страница 155

Страница: 155 / 195

Matrix

155

SETU VFX88L

VFX44L V1

System Manual

Default = All Calls.

• FXS Port Routing Group-refer chapter ‘Routing Group’

Default = 01 and Range = 01-16

• CLI Number on FXS Port-refer chapter ‘Routing Option-Called

Number Based’.

Select from: Received Called Party and Received Called Party.

Default = Received Calling Party

Incoming Calls Allowed:

• This parameter is required if the SE doesn’t want to allow any

incoming call through any SIP account.

• When Enabled, Incoming calls will be routed as per the Routing

type programmed for that SIP account.

• When Disabled, the incoming call on this SIP account will be

rejected.

•

Default: Enable.

Send CLI:

• Enable or Disable, to send or Block the CLI.
• When Send CLI is enabled, both the Calling Party number (SIP

Account number through which the call is being made) and the
Name (Station Name) will be sent.

• When Send CLI is disabled, neither will be sent.

• Default = Enabled.

Answer Anonymous Calls:

• When Enabled, Anonymous calls (calls without Calling Party

information) this type of calls will be accepted and routed by the
Gateway.

• When Disabled, Anonymous calls (calls without Calling Party

information) this type of calls will be rejected.

• Default = Enabled.

Maximum calls:

• This parameter is useful to route the call to the next SIP account if

number of calls to particular SIP account is maximum number of
calls supported by the service provider.

• It is applicable to each SIP Account for both incoming and outgoing

call.

Содержание SETU VFX44L




































































































































































































Результаты поиска

Содержание SETU VFX44L

Отзывы:

Бренды по названию

Популярные бренды

Matrix SETU VFX44L, Системное руководство

Результаты поиска

Содержание SETU VFX44L

Отзывы:

Бренды по названию

Популярные бренды