Matrix SETU VFX44L, Системное руководство

Страница: 61 / 195

Matrix
61 SETU VFX88L
/
VFX44L V1
System Manual
• Any waiting call will be released.
Call Hold Alert timer:
• It is applicable when you have put someone on hold Call Hold Alert
Timer expires and you go ON-Hook, you will get a
‘Ring’
to
indicate that there is a held party.
• If Call Hold Alert Timer expires and you are still OFF-Hook:
• System will wait for your port (FXS port) to go ON-Hook and wait
for expiry of Call Hold Reject timer.
• If you are still not ON-Hook and Call Hold Reject timer gets
expired, the HOLD call will be released.
Call Hold Reject Timer:
• It is applicable when you have put someone on hold and you don’t
retrieve the held call. After expiry of this timer, held party will be
disconnected automatically.
• If call hold reject timer expires and you are OFF-Hook, you will get
‘Error Tone’ on dial state.
• Now you can make a call.
• If held caller goes ON-Hook during ‘Hold’ state, and you (FXS Port)
are OFF-Hook, then you will get ‘Error Tone’ in dial state. (i.e.
dialing the emergency number or retrieve hold call access code or
any other number)
• Programming of the timer, access code and feature enable/disable
is through Web Jeeves.
• Both timers are programmable.
• Refer flow chart for more information.
How to program?
• Refer VFX88L
/
VFX44L Web Jeeves.
• Click on “
Class of Service
” to allow/deny Hold Feature for the FXS.
• Click on “
Access Codes Table
” to get the code for Retrieve/Hold.
• Click on “
System Parameters
” to program timers.
Range for timers is 001-999 seconds.
Default timer value for Call Hold Alert timer is 60 secs, for Call
Hold Reject Timer is 180 secs. and Remote Held Reject Timer
is 180 secs.