Matrix SETU VFX44L, Системное руководство

Страница: 127 / 195

Matrix
127 SETU VFX88L
/
VFX44L V1
System Manual
• If Network IP address is valid, you will get confirmation tone for
Programming Confirmation Tone Timer (7 secs. fixed).
• After expiry of this timer, the gateway will Restart.
• After restart of the gateway, you will be in normal dial state.
• After entering valid IP address, Connection type will change to
Static IP mode.
Use following command to program the Subnet Mask:
12-XXX XXX XXX XXX-#*
Where,
XXX XXX XXX XXX is the Subnet mask of Max.12 digits. Each octet is
of three digits.
Range = 000-255
By default = 255.255.255.000.
Example:
To program Subnet Mask address 255.255.1.0, enter the command:
12-255255001000-#*
If the programmed Subnet Mask is a valid, user will get Confirmation
tone for the period of Programming Confirmation tone timer (5 sec.
fixed). After expiry of this timer, the gateway will restart. At the end of
‘restart’, the user will be in normal dial state.
Display of IP Address on Phone:
Use following command to display the Network IP address on Phone:
21-#*
• You will get Confirmation tone for Programming Confirmation tone
timer.
• If you go ON-Hook during this period, than the IP Address is
displayed on the Phone instrument and you will get continuous ring
to indicate that it is in programming mode.
• But if you go ON-Hook after expiry of Programming Confirmation
tone timer, you will not get display of IP address but will get
continuous ring to indicate that it is in programming mode.
Use following command to display subnet mask:
22-#*