Maintenance
Page 23
Fig. 27: Regreasing the spread rail
•
The universal joint shaft must be greased.
Fig. 28: Universal joint shaft
7.2.3
Replacing agitator fingers / agitator shaft
The agitator fingers are wear parts and must be replaced if they are worn.
Attention!
Remove the key from the ignition before replacing the agitator fingers.
Carry out the following steps to replace the agitator fingers:
1. Set the spreader on the ground and shut off the tractor; remove the ignition key.
2. Loosen the shaft guard from the radial insert ball bearing (on the right in direction of
travel).
