Disposal
Page 25
Fig. 33: Replacing agitator fingers
8. After replacing the agitator fingers, install the agitator shaft in reverse sequence.
When installing the agitator shaft make sure that the agitator fingers are exactly
above the openings in the dosing gate valve.
Fig. 34: Agitator shaft in box spreader
7.3
Repair
If there are faults, problems, or other indications of malfunction,
contact your sales consultant or contact the manufacturer directly:
matev GmbH
Nürnberger Str. 50
90579 Langenzenn
Tel.: (Switchboard): +49 9101/90 87-0
Enter the article number and the chassis number here.
This information is on the type plate of the implement.
Article number: ........................................................................
Chassis number: .....................................................................
8
Disposal
The spreader must be disposed of in accordance with the applicable regulations of the
municipality or the country.
