Masibus 1006H, Руководство пользователя

Страница: 32 / 34

Flow Indicator Totaliser 1006H
REF NO: m16Aom101
Issue No: 03
User Manual 32
* For FL1 to FL4
:
To write these parameters:
0 for 10, 5 for 60,
1 for 20, 6 for 70,
2 for 30, 7 for 80,
3 for 40, 8 for 90,
4 for 50, 9 for 100
Sr. No. Reg. No. Parameter
Length in
byte
(Word) Read/Write
36 40036 SF4 2(1) R/W
37 40037 SF4+2 2(1) R/W
38 40038 FL4 2(1) R/W (0-9)*
39 40039 SF5 2(1) R/W
40 40040 SF5+2 2(1) R/W
41 40041 FL5 2(1) R (9)
42 40042 Baud rate 2(1) R/W (0 for 9600, 1 for 19200)
43 40043 Serial no 2(1) R/W (01 - 99)
44 40044 Pout 2(1) R/W (0000-9999)
45 40045 Default display 2(1) R/W (0 for batch total,
1 for integration total)
46 40046 Out zero 2(1) R/W (0000-4094)
47 40047 Out span 2(1) R/W (0000-4095)
48 40048 Default out 2(1) R/W (0 for yes, 1 for no)
49 40049 Int total 2(1) Read only
50 40050 Int total+2 2(1) Read only
51 40051 Batch total 2(1) Read only
52 40052 Batch total+2 2(1) Read only
53 40052 Roll count 2(1) Read only
54 40054 Flow rate 2(1) Read only
55 40055 Flow rate+2 2(1) Read only
56 40056 K factor 2(1) R/W
57 40057 K 2 2(1) R/W
58 40058 Pulse time 2(1) R/W (0-20)
59 40059 Frequency 2(1) R/W (0 for LOW, 1 for HIGH)
60 40060 Pulse width 2(1) R/W (0-50)
61 40061 Mul 2 2(1) R/W
62 40062 Mul factor 2(1) R/W
63 40063 Flow Rate dp 2(1) Read only
Coil Registers
64 1 Pre-warn relay/
Low alarm relay 1 R, digital (1 for ON, 0 for OFF)
65 2 Set point relay/
High alarm relay 1 R, digital (1 for ON, 0 for OFF)
66 5 Stop batch 0000 W, digital
67 5 Start batch FF00 W, digital