Flow Indicator Totaliser 1006H
REF NO: m16Aom101
Issue No: 03
User Manual
18
8. OPERATING DETAILS
The following paragraphs give detailed description of how to operate the unit.
Before using the instrument, make sure to study and understand this section.
8.1 Display Section:
The unit has Single window and it is groups of display:
Six digits 7-
segment, 0.56” Red LED display:
It displayed Flow rate/Integration Total.
While in EDIT mode, parameters are displayed in this window.
8.2 Keyboard Section
Unit has 4 key membrane keypad organized as 4 x 1 matrix.
Following Table explain the Operation of the Keys used for configuration.
SET OR
SHIFT
1. It will allow user to enter in EDIT mode, when instrument is
in RUN mode.
2. It will scroll menu and submenu when it is enabled
3. It will save edited data.
START OR
SHIFT
1. It will enter into the submenu, when main menu is enabled
and shows submenu‟s value.
2. It will select the digit to modify, when value is edited.
3. It will start batch, if pressed, when IT & BT are being
displayed
STOP OR
INCREMENT
1. It will increment value of digit selected or constant selected.
2. It will stop batch, if pressed, when BT/IT are being displayed.
ESCAPE
It will escape to previous status, with reference to its current
status.
Sequence of status:
IT MENU SUB-MENU
Parameter‟s Value
Escape sequence
When Esc key is pressed in Menu, the instrument will come in
RUN Mode. If user wants to go in EDIT mode, he will have to
enter the correct password again.
It is Also use for show Either Flow Value or Integrated Total.
8.3 Run Mode
Whenever mains is switched on to the unit,
Engineering value proportional to the input signal will be displayed as Process variable.
Decimal point is displayed at selected position.
Last saved batch total/integration total will be displayed on the window.
