Maserati Quattroporte, Руководство пользователя

Страница: 218 / 328

6
216
Driver Assistance Systems
(Continued)
to shut down if multiple systems
are operated at the same time
(example: ACC and FCW). When
conditions so allow, the CC system
can be reactivated by pushing the
CC “ON/OFF” button or the ACC
time gap button (in the Optional
Configuration) and resetting the
desired vehicle set speed.
Displayed Information
Apart from the pop-up messages at
the centre of the display, CC system
status is represented by icons at the
top left of the TFT display, in the
dedicated area. See "TFT Display
Areas" in section "Dashboard
Instrument and Controls".
Displayed information depends on
system status: ready, set, temporarily
cancelled or override.
Activation
To turn the system on, push the
ON/OFF button or the ACC time gap
button for 2 seconds (in the Optional
Configuration). The
white light
with below 3 dashes on the TFT display
will illuminate.
To turn the system off, push the
ON/OFF button a second time
or the ACC button (in the Optional
Configuration). The
white light
will turn off.
NOTE:
The CC system must be turned off
when not in use.
WARNING!
Never leave the Cruise Control system
on when not in use. You could
accidentally set the system or cause it
to go faster than you want. Always
leave the system off when you are not
using it.
Speed Range of Use
Speed km/h (mph)
Minimum 30 (20)
Speed km/h (mph)
Engaged/activated 30 (20)
Maximum 210 (130)
Setting Desired Speed
Turn on the CC function. When the
vehicle has reached the desired speed
(in the example: 100 km/h), push
downward the multifunction switch
(SET -) and release.
The
green light with below the
desired speed will illuminate on the
TFT display.
Release the accelerator and the vehicle
will operate at the selected speed.
NOTE:
The vehicle should be travelling at
a steady speed and on level ground
before pushing the switch downward.