Maserati Quattroporte, Руководство пользователя

Страница: 140 / 328

4
138
Dashboard Instruments and Controls
Turn Signals
Move the multifunction lever all the
way up or down until the stop trigger;
the left or right arrow on respectively
the speedometer and tachometer
instrument cluster, flashes to show
proper operation of the front and rear
turn signal lights.
To activate lane change function, tap
the lever up or down once, without
moving beyond the detent. The turn
signals (right or left) will flash three
times then automatically turn off. This
function is useful when overtaking or
changing lanes.
NOTE:
• If either light remains on and does
not flash, or flashes at a fast rate,
check for a defective outside light.
If an indicator on instrument cluster
fails while moving the lever, then the
turn indicator is probably defective.
• The message that a turn signal is on
will appear in the instrument cluster
and a continuous chime will sound
if the vehicle is driven more than 1.6
km (1 mile) with either turn signal
on.
High Beams and Flashing
To switch on the high beams with
the light switch in
or "AUTO"
position, shift the multifunction lever
onward.
A related telltale
will illuminate
on the tachometer.
By pulling the lever backward (toward
the steering wheel) you switch off the
high beams and switch on the low
beams.
You can signal another vehicle with
your headlights by lightly pulling the
multifunction lever toward you. This
will turn on the high beams headlights
until the lever is released.