Maserati Quattroporte, Руководство пользователя

Страница: 105 / 328

4
103
Dashboard Instruments and Controls
The pop-up message and the telltale
will be displayed for 5 seconds then
system will return to the previous
screen.
Warning and Indicator
Lights
Warning and Indicator Lights
on Speedometer
Following tell tales are displayed
on the speedometer, and related
messages are visible for 5 seconds on
the central sector of the display, unless
otherwise indicated.
Malfunction Indicator Light (MIL)
The Malfunction Indicator Light
(MIL) is part of an onboard
diagnostic system that monitors
engine and automatic transmission
control systems.
Under normal conditions, this indicator
light should switch on when the
ignition device is in
RUN position and
switch off as soon as the engine is
started.
This is a sign of the indicator light
working properly. If the indicator
remains lighted up or switches on
while driving, there is a failure in the
fuel supply/ignition and emission
control systems.
The failure could cause high exhaust
emissions, loss of performance,
poor vehicle handling and high
consumption levels.
Under these conditions you can
proceed slowly without forcing the
engine or driving at high speeds. The
indicator light will switch off if the
problem is solved.
The error will be registered by the
system in any case.
CAUTION!
• When the ignition device is in the
RUN position and if the indicator
light does not switch on or if it
switches on while driving, contact the
Service Network as soon as possible.
• Prolonged driving with the MIL on
could cause damage to the engine
control system. It also could affect
fuel economy and drivability. If
the MIL is flashing, severe catalytic
converter damage and power loss