Maserati Quattroporte, Руководство пользователя

Страница: 21 / 328

2
19
Understanding the Vehicle
Memorize the Driver's
Seat Position
This function allows the driver to
store up to two different memory
profiles for easy recall through a
memory switch. Each memory profile
contains desired position settings for
the driver seat, external side mirrors,
adjustable pedals (
), power tilt and
telescopic steering column and a set of
programmed radio stations.
Your key fob can also be set to recall
the same positions by pressing the
button.
NOTE:
• Only one key fob can be linked to
each of the memory positions.
• Passive Entry door handles cannot be
linked to the memory function. Use
either the memory recall switch or
the key fob (if linked to the memory
function) to recall memory positions
1 or 2.
The memory seat switch is located
on the driver's door trim panel. The
switch consists of three buttons:
• The "S" (SET) button, which is used to
activate the memory save function.
• The "1" and "2" buttons which
are used to recall either of two
programmed memory profiles.
Memory Profiles Setting
NOTE:
Saving a new memory profile will
erase an existing profile from memory.
To create a new memory profile,
perform the following:
• Cycle the ignition device to the
ACC
or RUN position.
• Adjust all memory profile settings
to desired preferences (i.e., seat,
side mirrors, adjustable pedals (
),
power tilt and telescopic steering
column and radio station presets).
• Press and release the "S" button on
the memory switch.
• Within 5 seconds, press and release
the memory button "1" or "2".
• Check on the instrument cluster for
the positive response of the actions
"Memory 1 (or 2) profile set".
After these steps, the profile set will
be memorized in the selected position.
NOTE:
Memory profiles can be set without
the vehicle in P (Park), but the vehicle
must be in P (Park) to recall a memory
profile.
Pairing Remote Keyless Entry
Transmitter to Seats Memory
Your key fob can be programmed
to recall one of two programmed
memory profiles by pressing the
button on the key fob.
NOTE:
This function can be enabled or
disabled using the MIA System, refer
to "Functions of Settings Menu
on MIA" in section "Dashboard
Instruments and Controls" for further
information.
To programme your key fobs, perform
the following actions:
• Cycle the ignition device to the
RUN
position.
• Move the seat and/or the other
adjustable devices in the position
that you wish to memorize, or recall
a previously memorized profile,
pressing the corresponding memory
button "1" or "2".