Maserati Quattroporte, Руководство пользователя

Страница: 123 / 328

4
121
Dashboard Instruments and Controls
Safety & Driving Assistant
Touch this soft-key to set the following
modes.
•
Forward Collision Warning /
Pedestrian Emergency Braking
The FCW function primary use the
front radar and the forward looking
camera for sensing vehicle and
pedestrian (if the car is equipped
with Pedestrian Emergency Braking
- PEB function) ahead, provide
warnings to the driver and may
perform brakings and brake jerks (if
set).
FCW is always active: it is possible to
set the warnings, the sensitivity and
the aid of the active braking.
FCW warnings can be set in "Off",
"Only Active Braking" (default mode)
and "W Active".
FCW sensitivity can be set to “Near”,
to “Med (Medium)” or to “Far”.
The default status of FCW sensitivity
is the “Med” setting.
FCW with active braking can be set to
“On” or “Off”.
See "Forward Collision Warning -
FCW" in section "Driver Assistance
Systems" for more details.
• Traffic Sign Assist
Activating this function the forward-
facing digital camera, with the aid
of maps on the navigation system, is
able to detect signs (no overtaking,
etc.) and speed limits. Those are
displayed by the TSA system on the
instrument cluster display together
with a possible alert when the vehicle
exceeds the speed limit.
See “Traffic Sign Assist - TSA” in
section “Driver Assistance Systems”
for further details.
• Lane Keeping Assist
Activating this function the LKA
system will attempt to keep the
vehicle in lane and can apply direct
input to electric power steering
system to change direction of vehicle.
Driver warnings are “Visual & Haptic”
(default mode).
System response can be set to
“Early”, “Medium” (default mode)
and “Late”.
System reaction force can be set to
“Low”, “Medium” (default mode)
and “High”.
See “Lane Keeping Assist - LKA” in
section “Driver Assistance Systems”
for more details.
• Blind Spot Alert
Activating this function the system
will try to prevent collision between
host vehicle and potential blind spot
collision hazard.
This function can be set in “Off”,
“Lights” or “ Chime”.
See "Blind Spot Assist - BSA” in
section “Driver Assistance Systems”
for more details.
• Active Blind Spot Assist
Activating this function the system
will try to prevent collision between
host vehicle and potential blind spot
collision hazard. System applies direct
input to electric power steering
system to change direction of vehicle
to avoid collision.
Driver warnings can be only “Visual”,
“Visual & Acoustic” (default mode) or
“Visual & Haptic”.
System response can be set to
“Early”, “Medium” (default mode)
and “Late”.