Maserati Quattroporte, Руководство пользователя

Страница: 141 / 328

4
139
Dashboard Instruments and Controls
Flashing occurs also with lights off if
the ignition device is
RUN position.
CAUTION!
The high beams can only be switched
on manually by pushing the
multifunction lever forward.
WARNING!
If the high beams are activated, they
will turn on automatically every
time the low beams are switched on
either manually or automatically. We
recommend therefore that you switch
them off when they are no longer
necessary and every time the twilight
sensor deactivates the external lights.
Wipers and Washers
Control
The multifunction lever is located on
the left side of the steering column.
The multifunction lever operates the
windshield wipers and washer when
the ignition device is placed in
RUN or
ACC position.
A windshield washer low fluid level
is indicated by the
warning light
and by the message on the instrument
cluster.
To refill the fluid, see "Maintenance
Procedures" in section "Maintenance
and Care".
CAUTION!
•
Turn the windshield wipers off when
driving through an automatic car
wash. The windshield wipers may be
damaged if the wiper control is left
in any position other than "OFF".
•
In cold weather, always turn off the
wiper switch and allow the wipers to
return to the park position before
turning off the engine. If the wiper
switch is left on and the wipers
freeze to the windshield, the wiper
motor may be damaged when the
vehicle is restarted.
• Always remove any buildup of snow
that prevents the windshield wiper
blades from returning to the off
position. If the windshield wiper
control is turned off and the blades
cannot return to the off position, the
wiper motor may be damaged.
Windshield Wipers
• Rotate the end of the multifunction
lever to one of the four settings to
activate the automatic intermittent
setting (see "Rain Sensing Windshield
Wipers" paragraph in this chapter).
• For low speed wiper operation
(stable position "LO"): rotate the end
of the multifunction control lever