Maserati Quattroporte, Руководство пользователя

Страница: 138 / 328

4
136
Dashboard Instruments and Controls
NOTE:
The headlights with wipers function
may be turned on and off using the
MIA system, refer to "Functions of
Settings Menu on MIA" in section
"Dashboard Instrument and Controls".
Headlights Time Delay
This safety function provides headlight
illumination for up to 90 seconds
(programmable) when leaving your
vehicle in an unlit area. To activate
automatically the delay function with
the light switch in "AUTO" position,
place the ignition device in the
OFF or
ACC position while the headlights are
still on.
The delay interval begins when the
ignition device is placed in the
OFF or
ACC position.
To activate manually the delay
function the headlights must be on
before place the ignition device in the
OFF or ACC position and the light
switch in "AUTO" position.
If you place the ignition in
RUN , the
system will cancel the delay.
NOTE:
• To activate this function the light
switch must be turned in "AUTO"
position within 45 seconds of placing
the ignition device in the OFF or ACC
position.
• Once the delay function is active, any
additional shifting of the light switch
will cancel the function.
• The headlight delay time is
programmable using the MIA system,
see "Functions of Settings Menu
on MIA" in section "Dashboard
Instrument and Controls".
• If the low beam LEDs are active due
to "Headlights with Wipers", than
the headlamps delay function will
not be activated when the ignition
device is set in
OFF position.
Manual Headlights
Turning the light switch in position
turns on the low beam together
with the position lights, the side
markers and the license plate lights
regardless of the ignition device state
and the "DAY" or "NIGHT" mode
detected by the twilight sensor (see
table in "Light Switch" paragraph of
this chapter). The related telltale
will display on the instrument cluster.
Fog Lights
The rear fog lights switch is built into
the lights switch.
To activate the rear fog lights, turn
the light switch to the low beam light
or "AUTO" position. Press the
lights switch to turn on the rear
fog lights.
Pressing again the lights switch
will deactivate the rear fog lights.
A dedicated telltale in the instrument
cluster illuminates when the rear fog
lights are turned on.