Maserati Quattroporte, Руководство пользователя

Страница: 148 / 328

4
146
Dashboard Instruments and Controls
the function is not available in Valet
Mode.
To Exit Valet Mode Function
To exit Valet Mode function touch
the "Exit Valet Mode" soft-key in the
"Welcome" pop-up at key on.
Deactivate the function by entering
the lock PIN code as previously
specified.
NOTE:
Valet Mode function cannot be
deactivated while the vehicle is in
motion.
Air Conditioning Controls
The vehicle is equipped with an
automatic dual-zone air conditioning
system that allows to adjust separately
the temperature and the airflow
distribution in the left and in the right
zone of the passenger compartment,
according to the requests of the driver
and the front passenger.
A humidity sensor, positioned on the
inner surface of the windshield, over
the rear view mirror, allows the A/C
system to prevent/eliminate fogging of
the windshield and side windows.
The best efficacy in preventing
fogging is obtained by selecting the
"AUTO" function, described later. A
dual zone solar sensor helps to achieve
the best comfort in presence of solar
radiation.
Upon request, the vehicle can
be equipped with an additional
automatic dual-zone air conditioning
system installed in the central
console, between the front seats. The
additional dual-zone module, can
be operated by the rear passengers
(see “Four-zone Climate Control” in
this chapter), by means of the control
panel at the end of central console,
but also by the front passengers
entering the "Comfort" category on
MIA display.
Dual-Zone Climate Controls
This system can be operated by using
the controls of the climate control
panel on the dashboard, or the
soft-keys on the MIA display when
"Comfort" mode is selected.
To monitor the comfort parameters on
board, you can also access the widget
page from the "Home" screen and
choose the "Climate" widget (see
example in picture).
To navigate the MIA screen, it is
possible use the "TUNE-SCROLL" lower
rotary knob on the central console to
scroll through the soft-key of each
function: the cursor will appear in
grey outline on the first available
function. Press “BROWSE/ENTER”
button to enter the selected