marklin 74492, Инструкция по эксплуатации

Страница: 11 / 36

11
Replace the turnout lever (1) with the turnout motor detail
part (3) or the turnout cover (2).
!
After the turnout lever has been removed, the turnout can
only be set with the 72752 control box.
7. Installation of clip-on parts
8. Trouble Running
If the turnout mechanism does not work, check the following:
• Is the switched mode power pack plugged into the wall
outlet and the Base Station? If not, plug it in.
• Are all of the connecting cables properly plugged into
their connections? If not, press on the plugs to make sure
they are all the way in the connections.
• Is a connecting cable damaged? Replace any damaged
cables.
• iIs the bar on the turnout mechanism correctly hung on the
turnout linkage? Check and correct if necessary.
9. Disposing:
Notes about environmental protection:
Products
that are identified with a garbage container with
a line through it may not be disposed of at the
end of their useful life with the normal household
trash. They must be taken to a collection point
for recycling.
Disposing: www.maerklin.com/en/imprint.html
10. Warranty
The warranty card included with this product specifies the
warranty conditions.
• Please contact your authorized Märklin dealer for repairs
or contact:
Gebr. Märklin & Cie. GmbH
Reparaturservice
Stuttgarter Str. 55 - 57
73033 Göppingen
Germany

+49 7161 608 222
E-Mail: Service@maerklin.de