manualshive.com logo in svg

Markes International Unity 2, Руководство пользователя

Поделиться
Скачать
Markes International Unity 2 Скачать руководство пользователя страница 35

 

 

 

QUI-1057

Page 35

Markes International Ltd 

T:

 +44 (0)1443 230935   

F:

 +44 (0)1443 231531   

E:

 [email protected] 

 

www.markes.com 

3.4.5

 

Reporting 

This option influences the information recorded in the ‘sequence reporter’ page of method linking, see 
Section 3.3.1. Recording parameters are selected by clicking on the appropriate box(es).   

NOTE

: the reporting options available will change if an accessory is being used in conjunction with UNITY 

2. 
 

 

Method Name 

Displays the name of the method used. 

Desorb Start Time 

Displays the time at which tube desorption started. 

Desorb End Time 

Displays the time at which tube desorption was completed. 

Peak Desorb Temp 

Displays the maximum temperature the tube oven reached during the analysis. 

Trap Fire Time 

Displays the time at which the cold trap desorption started (and therefore the time at which a GC 
connected to the UNITY would have been triggered to start). 

Unity Deviation 

Displays any error messages encountered during operation (e.g. Tube Leaked) 

Injection Count 

Displays the number of times a given sample has been analysed. 

Содержание Unity 2




































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды