MARIMEX PREMIUM 3500, Руководство пользователя

Страница: 80 / 108

80
EN
heat loss, maintaining a high water temperature is not economical and in some
cases not even possible.
• Use a tarpaulin or solar tarpaulin to reduce heat loss when the pool is not in
use.
• The water temperature in the pool should not exceed 30°C. The warm water
does not refresh too much and in addition creates optimal conditions for
algae to grow. Furthermore, some pool components may have temperature
restrictions. For example, the film may soften in foil pools. Therefore, do not
set the thermostat value higher than 30 °C.
5. CONTROL
The heat pump on/off
Press the button to switch on the heat
pump. The display shows the water tem-
perature at the inlet to the exchanger.
Press the button to switch off the heat
pump.
Set the target water temperature
Use the buttons and set the target
water temperature (range: 15 – 35°C).
The temperature value flashes on the
display when being set. The set tempera-
ture is automatically saved after a while
of inactivity, the temperature value stops
flashing and the display switches to the
display of the water temperature at the
inlet to the exchanger.
WARNING: The heat pump can only work
if sufficient water quantity flows through it from the filtration system.
Error display
If an error occurs, an error code will appear on the display (see below). f multiple
errors occur at the same time, their error code can be displayed using the buttons
and .
LED DISPLAY
OPERATING MODE STANDBY MODE
Button Button name Button function
On/Off
Press this button
to turn the unit on
or off.
Arrow up
Press to select "up"
or increase the para-
meter value.
Arrow down
Press to select
"down" or decrease
the parameter value.
CURRENT WATER
TEMPERATURE