Manitowoc Grove GMK 4100L-1, Руководство по эксплуатации

Страница: 609 / 1016

Crane operation
11.2 Standard slewing range type
Operating manual 3 302 690 en 11 - 21
GMK4100L-1
2
3
.1
1.
201
7
11.2 Standard slewing range type
The
MAXbase
slewing range type is available in the case of additional equip-
ment;
à
MAXbase slewing range type
, p. 11 - 23.
The
Standard
slewing range type is always available. The supplied lifting
capacity tables with symmetrical outrigger spans apply. These lifting capac-
ity tables are also supplied in printed form with the truck crane.
11.2.1 Permissible slewing ranges and working positions
360° slewing
range
•
Support the truck crane with the outrigger span required according to the
Lifting capacity table
.
•
Enter an RCL code for the 360° slewing range according to the
Lifting
capacity table
;
à
Enter rigging mode
, p. 11 - 32.
•
Rig a counterweight combination that is no larger than that permitted for
the rigged outrigger span. Slewing with a rigged counterweight is not per-
mitted with all outrigger spans;
à
Slewing with rigged counterweight
,
p. 12 - 97.
Working position
0° to the rear
•
Support the truck crane with the outrigger span required according to the
Lifting capacity table .
•
Slew the superstructure to the rear into the 0° position.
•
Lock the turntable;
à
p. 11 - 15.
•
Enter an RCL code for the
0° to the rear
working position according to
Lifting capacity table
;
à
Enter rigging mode
, p. 11 - 32.
The RCL will accept this code only if the turntable is locked and the
superstructure is in the 0° position.
H
All slewing operations are disabled if an RCL code is entered for the 0° to the
rear
working position. An RCL shutdown is triggered by unlocking the turn-
table. To acknowledge this shutdown, if slewing is permissible with the
rigged counterweight (
à
p. 12 - 97), set down the load and enter a rigging
mode for the 360° slewing range.
180° to the front
rigging position The same lifting capacity tables apply to this position as to the 360° slewing
range.