manualshive.com logo in svg

Manitowoc Grove GMK 4100L-1, Руководство по эксплуатации

Поделиться
Скачать
Manitowoc Grove GMK 4100L-1 Скачать руководство пользователя страница 383

Malfunctions in driving mode

8.5 Emergency operation and breakdown assistance

Operating manual

3 302 690 en

8 - 29

GMK4100L-1

2

3

.1

1.

201

7

 8.5.3         

Towing the truck crane

Observe the following if the truck crane has to be towed away:

– The truck crane may only be towed away with a tow-rod. Attach the tow-

rod to the tow-rod coupling on the front bumper.

– Be sure to observe the statutory regulations of the country in which you 

are working concerning the overall length of the towing and towed 
vehicle, including tow-rod.

– If the engine, steering and service brake still work, you can tow the truck 

crane with a lorry. 

– If the engine, steering or service brake no longer function properly, the 

truck crane must be towed with a special breakdown truck.

The front towing coupling is designed for a maximum tractive force of 10 t 
(22,000 lbs). Tensile force may be applied only forwards or at an angle of 45° 
to both sides of the longitudinal axis of the truck crane.

 

In the case of 
engine/
transmission 
damage

The following information only applies to towing the truck crane out of the 
immediate hazard area in the event of damage to the engine or 
transmission. 

Compressed-air 
supply

If the engine fails, the truck crane must be supplied with compressed air by 
the tractor-vehicle so that the brake system is still operable. 

s

S

Risk of accidents and damage when towing the truck crane long distances

Tow the truck crane at a maximum speed of 7 km/h (4 mph) and for a 
distance of max. 100 m (330 ft). For longer distances, additional measures 
must be taken, refer to 

Manitowoc Crane Care

. 

Содержание Grove GMK 4100L-1

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды