manualshive.com logo in svg

Manitowoc Grove GMK 4100L-1, Руководство по эксплуатации

Поделиться
Скачать
Manitowoc Grove GMK 4100L-1 Скачать руководство пользователя страница 105

Basic safety instructions

2.2 Organisational measures

Operating manual

3 302 690 en

2 - 3

GMK4100L-1

2

3

.1

1.

201

7

 2.2         

Organisational measures

The operating manual and the lifting capacity table should be kept in the 
truck crane for immediate access at all times, and must not be removed 
from the truck crane. You must have read and understood the operation and 
safety instructions in this operating manual and comply with them when 
working.

In addition to the operating manual and the lifting capacity table, observe 
all general, statutory and otherwise applicable regulations concerning acci-
dent prevention and environmental protection. You must have read and 
understood these and observe them when operating the crane and driving.

They could include:

– How to deal with hazardous materials 

– The wearing of personal protective equipment 

– Road traffic regulations and 

– all applicable regulations concerning the operation of a crane.

Make sure that persons who will work on the truck crane are provided with 
the required information prior to starting operations. Instruct your person-
nel (e.g. banksmen, slingers, rigging personnel) accordingly.

Make sure the maintenance personnel have the necessary expertise for safe 
crane operation. Make sure the maintenance personnel have access to the 
operating manual.

Only qualified or trained personnel may carry out work on the truck crane. 
Responsibilities regarding the operation of the truck crane, rigging, mainte-
nance and repair work must be clearly defined. 

Make sure only authorised personnel carry out work on the truck crane.

Do not leave long hair untied and do not wear loose clothing or jewellery 
(including rings) during work. These could get caught or pulled into the unit 
and result in injury.

Use your personal protective gear whenever necessary or prescribed.

Observe all safety instructions and warnings on the truck crane.

Keep all safety instructions and warnings on the truck crane in a legible 
condition.

s

Содержание Grove GMK 4100L-1

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды