Manitou MLA 628 -120 LSU 3-E2 Series, Руководство оператора

Страница: 104 / 130

3 - 24 3 - 24
REPLACEMENT OF THE REPLACEMENT OF THE FILT FILTER ER
- Remove I.C - Remove I.C. engine oil filter 3 (fig. D1/2) . engine oil filter 3 (fig. D1/2) ; discard the filter and ; discard the filter and the filter seal. the filter seal.
- Clean the - Clean the filter bracket with filter bracket with a clean, a clean, lint-free cloth. lint-free cloth.
- Lightly grease the new oil - Lightly grease the new oil filter seal and install the oil filter seal and install the oil filter (see : 3 - MAINTENANCE : FIL- filter (see : 3 - MAINTENANCE : FIL-
TERS CARTRIDGES AND BELTS) on the filter TERS CARTRIDGES AND BELTS) on the filter bracket. bracket.
Tighten the oil filter by hand pressure only and lock the filter in place by a quarter turn. Tighten the oil filter by hand pressure only and lock the filter in place by a quarter turn.
FILLING UP THE OIL FILLING UP THE OIL
- Install and tighten drain plugs 2 (fig. D1/2). - Install and tighten drain plugs 2 (fig. D1/2).
- Install access panel 1 (fig. D1/1).
- Install access panel 1 (fig. D1/1).
- - Fill up with oil (see : Fill up with oil (see : 3 - MAINTENANCE 3 - MAINTENANCE : LUBRICANTS : LUBRICANTS AND FUEL) by AND FUEL) by filler port 5 (fig. filler port 5 (fig.
D1/3). D1/3).
- Wait a few minutes to allow the oil to flow into the sump. - Wait a few minutes to allow the oil to flow into the sump.
- Start the I.C. engine and let it run for a few minutes.
- Start the I.C. engine and let it run for a few minutes.
- Check for possible leaks at the drain plug and the oil filter.
- Check for possible leaks at the drain plug and the oil filter.
- Stop the I.C. engine,
- Stop the I.C. engine, wait a few minutes and check the level between the two notches on wait a few minutes and check the level between the two notches on
dipstick 6 (fig. D1/3). dipstick 6 (fig. D1/3).
- Top up the level if - Top up the level if necessary. necessary.
D1/3 D1/3
4 4
3 3
2 2 2 2
6 6
5 5
Tighten the oil filter by hand pressure only and lock the filter in place by a Tighten the oil filter by hand pressure only and lock the filter in place by a
quarter turn.
quarter turn.
IMPORTANT IMPORTANT
D3 - D D3 - D
R RY Y A AIIR R FI FILT LTER ER CA CART RTRI RIDG DGE E
CHANGE CHANGE
In case In case of use of use in a hea in a heavily dust laden vily dust laden atmosphere, atmosphere, there are there are pre-filtration cartridges, pre-filtration cartridges, see see
: 3 - MAINTENANCE : FIL : 3 - MAINTENANCE : FILTERS CARTRIDGES AND BEL TERS CARTRIDGES AND BELTS. Also, TS. Also, the checking and cleaning the checking and cleaning
schedule of the cartridge must be schedule of the cartridge must be reduced (up to 250 hours in a reduced (up to 250 hours in a heavily laden dust atmos- heavily laden dust atmos-
phere and with pre-filtration). phere and with pre-filtration).
Change the cartridge in a cl Change the cartridge in a cl ean location, with the I.C. engine stopped. ean location, with the I.C. engine stopped. Never run the I.C. engine Never run the I.C. engine
with the air filter removed or damaged. with the air filter removed or damaged.
- Open the I.C. engine cover. - Open the I.C. engine cover.
- Loosen the bolts and remove cover 1 (fig. D3).
- Loosen the bolts and remove cover 1 (fig. D3).
- Gently remove the
- Gently remove the cartridge 2 (fig. D3), cartridge 2 (fig. D3), taking care to avoid s taking care to avoid spilling the dust. pilling the dust.
- Leave the safety cartridge in place. - Leave the safety cartridge in place.
- The following parts must be cleaned with a damp
- The following parts must be cleaned with a damp,, clean lint-free cloth. clean lint-free cloth.
• The inside • The inside of the filter of the filter and cover and cover..
• The inside of the filter inlet hose. • The inside of the filter inlet hose.
• The gasket surfaces in
• The gasket surfaces in the filter and the filter and in the cover. in the cover.
- Check pipes and connections between the air filter and the I.C. engine and the connection and state of the clogging indicator on - Check pipes and connections between the air filter and the I.C. engine and the connection and state of the clogging indicator on
the filter. the filter.
- Before installing check the state of the new cartridge (see : 3 - MAINTENANCE : FILTERS CARTRIDGES AND BELTS). - Before installing check the state of the new cartridge (see : 3 - MAINTENANCE : FILTERS CARTRIDGES AND BELTS).
- Introduce the cartridge into the filter axis
- Introduce the cartridge into the filter axis and push it in, and push it in, pressing the edges and pressing the edges and not the middle. not the middle.
- Reassemble the co - Reassemble the cover ver,, guiding the valve downwards. guiding the valve downwards.
D3 D3
1 1
2 2
Change the cartridge in a clean location, with the Change the cartridge in a clean location, with the I.C. engine stopped. Never I.C. engine stopped. Never
run the I.C. engine with the air filter removed or damaged. run the I.C. engine with the air filter removed or damaged.
IMPORTANT IMPORTANT
CONTENTS CONTENTS
https://www.forkliftpdfmanuals.com/