Manitou MLA 628 -120 LSU 3-E2 Series, Руководство оператора

Страница: 103 / 130

3 - 23 3 - 23
C5 - F C5 - F
RO RONT NT A AND ND R RE EA AR R A AX XL LE E D DIIFF FFE ERE REN NTI TIA AL L OI OIL L LE LEVE VEL L
CHECK CHECK
Park the lift truck on level ground with the I.C. engine stopped. Park the lift truck on level ground with the I.C. engine stopped.
- Remove level plug 1 (fig. C5). The oil should be flush with the edge of the hole. - Remove level plug 1 (fig. C5). The oil should be flush with the edge of the hole.
- If neces
- If necessary, sary, add oil (see : add oil (see : 3 - MAINTENANCE 3 - MAINTENANCE : LUBRICANTS : LUBRICANTS AND FUEL) by AND FUEL) by the filler port the filler port
2 (fig. C5). 2 (fig. C5).
- Replace and tighten the level plug 1 (fig. C5) (tightening torque 32 ft/lb). - Replace and tighten the level plug 1 (fig. C5) (tightening torque 32 ft/lb).
- Repeat this operation for the rear axle differential.
- Repeat this operation for the rear axle differential.
C6 - F C6 - F
R RO ON NT T A AN ND D R RE EA AR R W WH HE EE ELS LS R RED EDUC UCE ERS RS O OIL IL L LE EVE VEL L
CHECK CHECK
Park the lift truck on level ground with the I.C. engine stopped. Park the lift truck on level ground with the I.C. engine stopped.
- Check the level - Check the level on each front wheel on each front wheel reducer reducer..
- Place level plug 1 (fig. C6) in the horizontal position. - Place level plug 1 (fig. C6) in the horizontal position.
- Remove the le
- Remove the level plug vel plug ; the oil should be flus ; the oil should be flush with the edge of the hole. h with the edge of the hole.
- If necessary, - If necessary, add oil (see : add oil (see : 3 - MAINTENANCE 3 - MAINTENANCE : LUBRICANTS : LUBRICANTS AND FUEL) by AND FUEL) by the same hole. the same hole.
- Replace and tighten the level plug 1 (fig. C6) (tightening torque 32 ft/lb). - Replace and tighten the level plug 1 (fig. C6) (tightening torque 32 ft/lb).
- Repeat the same
- Repeat the same operation on each rear operation on each rear wheel reducer wheel reducer..
2 2
C5 C5
C6 C6
1 1
1 1
2 2
D - EVERY 500 HOURS SERVICE D - EVERY 500 HOURS SERVICE
Carry out the operations described previously as well as the following operations. Carry out the operations described previously as well as the following operations.
D1 - I.C. D1 - I.C.
EN ENGI GINE NE OI OIL L
DRAIN DRAIN
D2 - I.C. D2 - I.C.
EN ENGI GINE NE OI OIL L F FIIL LT TE ER R
CHANGE CHANGE
Park the lift truc Park the lift truck on level ground k on level ground,, let the I.C. en let the I.C. engine run at idle for a few minute gine run at idle for a few minutes, s, then then
stop the I.C. engine. stop the I.C. engine.
DRAINING THE OIL DRAINING THE OIL
- Open the I.C. engine cover. - Open the I.C. engine cover.
- Remove access panel 1 (fig. D1/1).
- Remove access panel 1 (fig. D1/1).
- Place a container under drain plugs 2 (fig. D1/2) and under the oil filter 3 (fig. D1/2).
- Place a container under drain plugs 2 (fig. D1/2) and under the oil filter 3 (fig. D1/2).
- Unscrew the drain plugs 2 (fig. D1/2). - Unscrew the drain plugs 2 (fig. D1/2).
- Remove filler cap 4 (fig. D1/3) in order to ensure that the oil is drained properly. - Remove filler cap 4 (fig. D1/3) in order to ensure that the oil is drained properly.
Dispose of the drain oil in an ecological manner. Dispose of the drain oil in an ecological manner.
D1/1 D1/1
D1/2 D1/2
1 1
Dispose of the drain oil in an ecological manner. Dispose of the drain oil in an ecological manner.
IMPORTANT IMPORTANT
CONTENTS CONTENTS
https://www.forkliftpdfmanuals.com/