Manitou MLA 628 -120 LSU 3-E2 Series, Руководство оператора

Страница: 128 / 130

4 - 8 4 - 8
Make sure that the rapid connectors are clean and protect the holes which are not used, with Make sure that the rapid connectors are clean and protect the holes which are not used, with
the caps provided. the caps provided.
HAND RELEASING AND HAND RELEASING AND DISCONNECTING THE ATTA DISCONNECTING THE ATTACHMENT CHMENT
- - Proceed in the Proceed in the reverse order of reverse order of paragraph HAND LOCKING paragraph HAND LOCKING AND CONNECTING THE AND CONNECTING THE
ATT ATTACHMENT while making sure you i ACHMENT while making sure you install the locking pin and nstall the locking pin and the clip in the the clip in the bracket (fig. bracket (fig.
A). A).
LAYING AN ATTACHMENT LAYING AN ATTACHMENT
- Proceed in - Proceed in the reverse order of paragraph TAKING UP AN ATTA the reverse order of paragraph TAKING UP AN ATTACHMENT while making sure CHMENT while making sure
you place the attachment flat on the ground and in closed position. you place the attachment flat on the ground and in closed position.
C C
D D
E E
1 1
Make sure that the rapid (quick-release) connectors are clean and protec- Make sure that the rapid (quick-release) connectors are clean and protec-
ted with the caps provided when not in use.
ted with the caps provided when not in use.
IMPORTANT IMPORTANT
D - H D - H
YD YDRA RAUL ULIC IC AT ATTA TACH CHME MENT NT AN AND D HY HYDR DRAU AULI LIC C LOC LOCKIN KING G DE DEVI VICE CE
( (
OPTION OPTION
))
MLA 628 -120 LSU POWERSHIFT Series 3-E2 MLA 628 -120 LSU POWERSHIFT Series 3-E2
TAKING UP AN ATTACHMENT TAKING UP AN ATTACHMENT
- Ensure that the attachment is oriented for locking to the carriage. If it is not correctly - Ensure that the attachment is oriented for locking to the carriage. If it is not correctly
oriented, oriented, take the necessary precautions in or take the necessary precautions in order to move it safely der to move it safely..
- Check that the rods on the locking cylinder are retracted (fig. A). - Check that the rods on the locking cylinder are retracted (fig. A).
- Park the lift truck with the boom lowere
- Park the lift truck with the boom lowered in front of and par d in front of and parallel to the attachment, allel to the attachment, tilt the tilt the
carriage forwards (fig. B). carriage forwards (fig. B).
- Bring the - Bring the carriage under the carriage under the locking tube of locking tube of the attachment, the attachment, slightly lift the slightly lift the boom, boom, incline incline
the carriage backwards in order to position the attachment (fig. C). the carriage backwards in order to position the attachment (fig. C).
- Lift the attachment off the ground to facilitate locking. - Lift the attachment off the ground to facilitate locking.
HYDRAULIC LOCKING AND HYDRAULIC LOCKING AND CONNECTING THE ATTA CONNECTING THE ATTACHMENT CHMENT
- Put the valve in position A ( - Put the valve in position A (fig. D), fig. D), the hydraulic circuit of the hydraulic circuit of the attachment locking open. the attachment locking open.
- Switch button 1 (fig. E) of the distributor lever up to completely lock the attachment on - Switch button 1 (fig. E) of the distributor lever up to completely lock the attachment on
the carriage. the carriage.
- Stop the I.C. engine and keep the ignition on the lift truck. - Stop the I.C. engine and keep the ignition on the lift truck.
- Release the pressure from the attachment hydraulic circuit by pressing button 1 (fig. E) - Release the pressure from the attachment hydraulic circuit by pressing button 1 (fig. E)
on the distributor lever up and down 4 or 5 times. on the distributor lever up and down 4 or 5 times.
- Connect the rapid connectors according to the logic of the attachment’s hydraulic move- - Connect the rapid connectors according to the logic of the attachment’s hydraulic move-
ments ments
A A
B B
CONTENTS CONTENTS
https://www.forkliftpdfmanuals.com/