- Tilt the carriage (1) forwards an
- Tilt the carriage (1) forwards and move the lift truck slowly forw
d move the lift truck slowly forwards (2),
ards (2), to insert the fork
to insert the fork
under the load (fig. E4) (block the load if necessary).
under the load (fig. E4) (block the load if necessary).
- Continue to move the lift truck forwards (2) tilting the carriage (3) (fig. E4) backwards to
- Continue to move the lift truck forwards (2) tilting the carriage (3) (fig. E4) backwards to
position the load on the forks and check the load's longitudinal and lateral stability.
position the load on the forks and check the load's longitudinal and lateral stability.
1 - 15
1 - 15
2
2
1
1
E3
E3
1
1
3
3
2
2
E4
E4
1
1
2
2
3
3
F1
F1
1
1
2
2
F2
F2
F - TAKING UP AND LAYING A HIGH LOAD ON TIRES
F - TAKING UP AND LAYING A HIGH LOAD ON TIRES
You must not raise the boom if you have not checked the transverse attitude of the lift truck
You must not raise the boom if you have not checked the transverse attitude of the lift truck
(see
(see
: INSTRUCTIO
: INSTRUCTIO
NS FOR HANDLIN
NS FOR HANDLIN
G A LOAD
G A LOAD
: D - TRANSVER
: D - TRANSVER
SE ATTITUD
SE ATTITUD
E OF THE LIFT
E OF THE LIFT
TRUCK).
TRUCK).
REMINDER
REMINDER : Make sure th
: Make sure that the following operations
at the following operations can be performed with good
can be performed with good visibility
visibility
(see
(see : OPERA
: OPERATIONS INS
TIONS INSTRUCT
TRUCTIONS UNLA
IONS UNLADEN AND LADEN
DEN AND LADEN : D -
: D - VISI
VISIBILIT
BILITY).
Y).
TAKING UP A HIGH LOAD ON TIRES
TAKING UP A HIGH LOAD ON TIRES
- Ensure that the forks will easily pass under the load.
- Ensure that the forks will easily pass under the load.
- Lift and extend the boom (1) (2) until the forks are level with the load,
- Lift and extend the boom (1) (2) until the forks are level with the load, moving the lift truck
moving the lift truck
(3) forward if
(3) forward if necessary (fig. F1),
necessary (fig. F1), moving very slowly and carefully
moving very slowly and carefully..
- Alwa
- Always think about keeping the distance necessary to fit the forks under the load,
ys think about keeping the distance necessary to fit the forks under the load, bet-
bet-
ween the pile and the lift truck (fig. F1) and use the shortest possible length of boom.
ween the pile and the lift truck (fig. F1) and use the shortest possible length of boom.
- Bring the for
- Bring the forks in front of the load
ks in front of the load by alternately extending and retracting the boom (1) or,
by alternately extending and retracting the boom (1) or,
if necessary,
if necessary, moving the lift truck forward (2) (fig. F2). Put the handbrake on and set the
moving the lift truck forward (2) (fig. F2). Put the handbrake on and set the
reverse gear to neutral.
reverse gear to neutral.
- Slightly lift the load (1) and incline the carriage (2) backwards to stabilize the load (fig.
- Slightly lift the load (1) and incline the carriage (2) backwards to stabilize the load (fig.
F3).
F3).
- Tilt the load sufficiently backwards to ensure its stability.
- Tilt the load sufficiently backwards to ensure its stability.
- Watc
- Watch the load,
h the load, if it is overloaded,
if it is overloaded, return the load to the place f
return the load to the place from which it was tak
rom which it was taken.
en.
- If possible lower the load without shifting the lift truck. Lift the boom (1) to release the
- If possible lower the load without shifting the lift truck. Lift the boom (1) to release the
load,
load, retract (2) and lower
retract (2) and lower the boom (3) to bring the load
the boom (3) to bring the load into the transport position (fig.
into the transport position (fig.
F4).
F4).
- If this
- If this is not possible,
is not possible, back up the
back up the lift truck (1),
lift truck (1), maneuvering very gently and care
maneuvering very gently and carefully to
fully to
WARNING
WARNING
Do not raise the boom until you have first checked the level attitude of the lift truck (see : INS-
Do not raise the boom until you have first checked the level attitude of the lift truck (see : INS-
TRUCTIONS FOR HANDLING A LOAD : D
TRUCTIONS FOR HANDLING A LOAD : D - TRANSVERSE ATTITUDE OF THE LIFT TRUCK).
- TRANSVERSE ATTITUDE OF THE LIFT TRUCK).
CONTENTS
CONTENTS
https://www.forkliftpdfmanuals.com/
Содержание MLA 628 -120 LSU 3-E2 Series
