Manitou MLA 628 -120 LSU 3-E2 Series, Руководство оператора

Страница: 98 / 130

3 - 18 3 - 18
B8 - C B8 - C
A AB B VE VENT NTIL ILAT ATIO ION N FI FILT LTER ER
( (
OP OPTI TION ON A AIIR R CON CONDIT DITION IONING ING
))
CLEAN CLEAN
- Lift up protective casing 1 (fig. B8). - Lift up protective casing 1 (fig. B8).
- Lift out cabin ventilation filter 2 (fig. B8).
- Lift out cabin ventilation filter 2 (fig. B8).
- Clean the filter with a compressed air jet.
- Clean the filter with a compressed air jet.
- Check its condition and change if necessary (see : 3 - MAINTENANCE : FILTERS CAR-
- Check its condition and change if necessary (see : 3 - MAINTENANCE : FILTERS CAR-
TRIDGES AND BELTS). TRIDGES AND BELTS).
- Install the filter and protective casing. - Install the filter and protective casing.
B9 - B B9 - B
AT ATTE TERY RY EL ELEC ECTR TROLY OLYTE TE LEV LEVEL EL
CHECK CHECK
Check the electrolyte level in each cell of the battery. Check the electrolyte level in each cell of the battery.
If the lift truck is working in a h
If the lift truck is working in a high temperature environment, igh temperature environment, check the level more fre check the level more fre--
quently than every 50 hours service. quently than every 50 hours service.
- Open the I.C. engine cover. - Open the I.C. engine cover.
- Remove caps 1 (fig. B9) from each cell of the battery.
- Remove caps 1 (fig. B9) from each cell of the battery.
- The level is correct when it is 1/2 in. above the top of the plates in the battery.
- The level is correct when it is 1/2 in. above the top of the plates in the battery.
- If necess - If necessary, ary, top up the cells with clean distilled water that has been stored in a glass top up the cells with clean distilled water that has been stored in a glass
container. container.
- Clean and dry caps 1 (fig. B9) and install. - Clean and dry caps 1 (fig. B9) and install.
- Check the terminal connections and lightly smear them with petroleum jelly to prevent the
- Check the terminal connections and lightly smear them with petroleum jelly to prevent the
formation of corrosion. formation of corrosion.
Handling and servicing a Handling and servicing a battery can be dangerous, t battery can be dangerous, t ake the following precautions ake the following precautions : :
- Wear protective goggles. Keep the battery horizontal. - Wear protective goggles. Keep the battery horizontal.
- Never smoke or work near a naked flame.- Work in a well-ventilated area. - Never smoke or work near a naked flame.- Work in a well-ventilated area.
- In the event of electrolyte being spilled onto the skin or splashed in the eyes, - In the event of electrolyte being spilled onto the skin or splashed in the eyes,
rinse thoroughly with cold water for 15 minutes and call a doctor. rinse thoroughly with cold water for 15 minutes and call a doctor.
B8 B8
2 2
1 1
B9 B9
1 1
Handling and servicing a battery can be dangerous, take the following precau- Handling and servicing a battery can be dangerous, take the following precau-
ti
tion ons s : :
- Wear protective goggles.
- Wear protective goggles.
- Keep the battery horizontal.
- Keep the battery horizontal.
- Never smoke or work near an open flame.
- Never smoke or work near an open flame.
- Work in a well-ventilated area.
- Work in a well-ventilated area.
- In the event of electrolyte being spilled onto the skin or splashed in the
- In the event of electrolyte being spilled onto the skin or splashed in the
eyes, rinse thoroughly with cold water for 15 minutes and call a doctor. eyes, rinse thoroughly with cold water for 15 minutes and call a doctor.
WARNING WARNING
B10 - R B10 - R
E EA AR R A AXL XLE E OSC OSCILL ILLATI ATION ON
GREASE GREASE
Clean and lubricate the points 1 (2 lubricators) (fig. B10) with grease (see : 3 - MAINTE- Clean and lubricate the points 1 (2 lubricators) (fig. B10) with grease (see : 3 - MAINTE-
NANCE
NANCE : LUBRICANTS : LUBRICANTS AND FUEL) and r AND FUEL) and remove the surplus emove the surplus grease. grease.
B11 - T B11 - T
RAN RANSMI SMISSI SSION ON UNI UNIVE VERS RSAL AL JOI JOINT NT
GREASE GREASE
Clean and lubricate Clean and lubricate the following points with the following points with grease (see : grease (see : 3 - MAINTENANCE 3 - MAINTENANCE : LUBRI- : LUBRI-
CANTS AND FUEL) and remove the surplus grease. CANTS AND FUEL) and remove the surplus grease.
- Remove access panel 1 (fig. B11/1). - Remove access panel 1 (fig. B11/1).
2 - Lubricators of the universal joint Transmission/Front axle (4 lubricators) (fig. 2 - Lubricators of the universal joint Transmission/Front axle (4 lubricators) (fig.
B10 B10
1 1
B11/1 B11/1
1 1
CONTENTS CONTENTS
https://www.forkliftpdfmanuals.com/