Manitou MI 50L D ST3B S2 Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 112

background image

LIFT TRUCK MAINTENANCE INSTRUCTIONS

GENERAL INSTRUCTIONS

- Ensure the area is sufficiently ventilated before starting the lift truck.

- Wear clothes suitable for the maintenance of the lift truck, avoid wearing jewellery and loose clothes. Tie and protect

your hair, if necessary.

- Stop the engine and remove the ignition key, when an intervention is necessary.

- Read the operator's manual carefully.

- Carry out all repairs immediately, even if the repairs concerned are minor.

- Repair all leaks immediately, even if the leak concerned is minor.

- Ensure that process materials and of spare parts are disposed in all safely and in an ecological manner.

- Be careful of the risk of burning and splashing (exhaust, radiator, engine, etc.).

MAINTENANCE

- Perform the periodic service (

3 - LIFT TRUCK MAINTENANCE) to keep your lift truck in good working condition. Failure

to perform the periodic service may cancel the contractual guarantee.

MAINTENANCE LOGBOOK

- The maintenance operations carried out in accordance with the recommendations given in part 3 - LIFT TRUCK MAINTENANCE

and the other inspection, servicing or repair operations or modifications performed on the lift truck or its attachments
shall be recorded in a maintenance logbook. The entry for each operation shall include details of the date of the works,
the names of the individuals or companies having performed them, the type of operation and its frequency, if applicable.
The part numbers of any lift truck items replaced shall also be indicated.

LUBRICANT AND FUEL LEVELS

- Use the recommended lubricants (never use contaminated lubricants).

- Do not fill the fuel tank when the engine is running.

- Only fill up the fuel tank in areas specified for this purpose.

- Do not fill the fuel tank to the maximum level.

- Do not smoke or approach the lift truck with a flame, when the fuel tank is open or is being filled.

HYDRAULICS

- Any work on the load handling hydraulic circuit is forbidden except for the operations described in part: 3 - LIFT TRUCK

MAINTENANCE.

- Do not attempt to loosen unions, hoses or any hydraulic component when the circuit is under pressure.

IMPORTANT

It is dangerous to change the setting and remove the BALANCING VALVES or SAFETY VALVES which may be fitted to your lift truck cylinders.

The HYDRAULIC ACCUMULATORS that may be fitted on your lift truck are pressurised units.

Removing these accumulators and their pipework is dangerous.

Such operations must only be performed by approved personnel (consult your dealer).

ELECTRICITY

- Do not short-circuit the starter relay to start the engine. If the forward/reverse selector is not in neutral and the parking

brake is not applied, the lift truck may suddenly start to move.

- Do not place metal items on the battery.

- Disconnect the battery before working on the electrical circuit.

1 - 16

647650 (19/02/2018) MI-X 50L/60/70 D C ST3A S2 / MI 50L/60/70 D ST3B S2 / MI 50L/60/70 G S2

«
...
18
19
20
21
22
...
»

Содержание MI 50L D ST3B S2

















































































































Отзывы:

Нет отзывов

Похожие инструкции для MI 50L D ST3B S2

Бренд: EAE Страницы: 36

Бренд: Abicor Binzel Страницы: 42

Бренд: ICP DAS USA Страницы: 5

Бренд: ICP DAS USA Страницы: 7

Бренд: National Instruments Страницы: 23

Бренд: Nexus 21 Страницы: 24

Airedale Sentinel

Бренд: Modine Manufacturing Страницы: 2

Бренд: Ravaglioli Страницы: 72

OILPRESS 180.902

Бренд: WILHELM KELLER Страницы: 4

Бренд: Advantech Страницы: 82

WAGO-I/O-SYSTEM 750-424

Бренд: WAGO Страницы: 12

Бренд: HALDER Страницы: 2

ControlLogix 1756-CNB

Бренд: Allen-Bradley Страницы: 36

Бренд: JAMO Страницы: 18

WALLACE & TIERNAN SFC SC

Бренд: Evoqua Страницы: 82

Бренд: Thiele Страницы: 5

Бренд: iCONNECT Страницы: 20

Бренд: Air Liquide Страницы: 23

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды