MANATEC JUMBO HCV, Руководство по эксплуатации

Страница: 70 / 135

Ref.: MEL-WA(3D HCV) - OM Ver.1.7
65
7.4.4.7.
SCRUB ANGLE ADJUSTMENT
Press NEXT button to view & adjust Scrub angle & the tilt direction of
Axle. By feeding the distance of the Spring plates or Track width, the
amount of the movement towards the direction will be indicated. Now
adjust the Scrub angle to 0° as per On-screen guidance & as
explained below:
Fig. 118

Fix the Screw jack in between the two Axles as shown above.
 Loosen the „U‟ bolts on the B1 Axle using Power tools and raise
the Screw jack in such a way that the B1 tyre is pushed as
shown above direction guided by the screen.

Push the wheel until the Scrub angle reaches zero or within the
tolerance. Now tigh
ten the „U‟ bolts firmly using Power tools.
Fig. 119

After adjustment of B1 scrub angle, press NEXT button to read
other parameters of B1 Axle.
Fig. 120
Fig. 121