MANATEC JUMBO HCV, Руководство по эксплуатации

Страница: 53 / 135

Ref.: MEL-WA(3D HCV) - OM Ver.1.7
48
7.4. ALIGNMENT
Keep hands & other body parts away from jacking surfaces. Follow jack
manufacturer‟s safety recommendations during tyre location change. Failure
to comply may lead to injury
The Target plates are configured with an exclusive identification name (F1, F2,
B4, B3, B2, & B1) depending on the axle location as given below. The location
of plates is not changeable. If altered, alignment will go wrong (B4 Not
Applicable for 5A model & F2/B3 are common plates in 4A model)
If required, Press CTRL+S to save the data and come to Desktop during
alignment sequence any point of time
If START ALIGNMENT button is pressed in Welcome screen, user will be prompted to
select the Vehicle type ie., Car/Light Truck (or) HCV Truck (or) Bus with the required
Axle configurations as given below:
Fig. 74
Select the axle configuration by scrolling the cursor to choose the correct configuration
of vehicle being parked on the wheel aligner bay.
Press &
&
button to toggle & view the Axle configurations of
Trailers / Full trailer and articulated bus available:
Once the Vehicle type is selected, User Login screen will be displayed:
Fig. 75
RIGHT
LEFT
F1 F2 B4 B3 B2 B1