MANATEC JUMBO HCV, Руководство по эксплуатации

Страница: 38 / 135

Ref.: MEL-WA(3D HCV) - OM Ver.1.7
33
6.9.2. ROTARY PLATE (7 ton)
Fig. 35
The Rotary plate consists of a freely rotating plate with load capacity of 7 ton
in each Rotary plate suitable for HCVs. The front wheels of the vehicle being
aligned should rest on these plates. The Rotary plate helps to free up the
wheels from the friction and relaxing the ball joint to its original condition. Lock
pins are provided to arrest the movement of rotation while parking the vehicle
over the plate for alignment. The Locking pins must be removed while taking
measurements.
The Rotary plates enable Left turn and Right turn movement required for
measuring Caster & Kingpin angles.
Ensure the Top plate of Rotary plates are locked with Locking pins
before parking the vehicle
The Rotary plate must be maintained properly by user free from dust
6.9.3. ROTARY PLATE SEGMENT PLATE
Rotary plate segment plates are provided to fill the gap between the Rotary
top plate and the pit edge of wheel rolling side to facilitate proper wheel
movement during Runout operation.
Fig. 36
6.9.4. FRONT TARGET PLAT EXTENSION SPACER, 150mm Lg.
These spacers are provided to extend the Target plates for vehicles with
smaller track width (like Cars & LCVs) to bring it within the Camera line of
sight. Also to bring the target plates to camera vision where the vehicle body is
too much protrude out from the wheel.
Fig. 37
6.9.5. WHEEL STOPPER
Wheel stoppers are provided to arrest the movement of Wheel beyond
required location during alignment process.
Fig. 38